Jiffy-Junction Specifications NEMA 4X Enclosure: UV protected, high impact PVC plastic. Horn: 83-85 db at 10'. Alarm Section Voltage: 120V AC, 60 HZ, single phase. Alarm Light: 6 watts Pump Section Voltage: 120V AC, 60HZ, single phase, 1 HP 230V AC, 60 HZ, single phase, 2 HP Full Load Amps: 12 amps Pilot Switch: Switch #4301, 15 foot cord, 16 GA cable. Enclosure Dimensions: 7.0" X 7.0" X 5.25" high Overall Dimensions: 29.0" X 7.0" X 5.0" deep Shipping Weight: 9 Pounds Patent #: D395,038 & 5,696,493 Jiffy Junction Pricing Model # Description JJ1 120V Pedestal Unit with high water alarm and Septronics float control switch #4301 JJ2 230V Pedestal Unit with high water alarm and Septronics float control #4301 Single Phase Simplex Pump Control Alarm System Here's an affordable pump control-alarm system for residential or commercial pressurized septic systems. The Jiffy-Junction pedestal is simple to install. All power connections and the receptacle for the pump and pump switch are easily accessible by simply opening the panel door. This means servicing the system can be done quickly. The Jiffy-Junction pedestal is designed for use with one single phase pump in effluent and sewage chambers. If an alarm condition occurs, the alarm float activates the audiovisual signaling system. The Jiffy-Junction can be ordered for either 120 or 230 volt applications. Our customers tell us that the Jiffy-Junction pedestal is the simplest and easiest to install, that it is also serviceable, versatile and affordable. We couldn't have said it better ourselves. Standard Features NEMA 4X watertight PVC enclosure. Rugged poly pedestal with access door. Receptacle for plugging in pump switch and pump. Alarm light with 360 degree visibility. Alarm horn. Horn silent switch. Alarm fuse. Alarm float switch with 15 foot cord. Gas tight seal for cords. UL listed. Complete installation instructions. Two year limited warranty from date of installation. Completely assembled and shipped in one box. Advantages Built-in receptacle simplifies pump and switch installation. Pump switch can be plugged into receptacle. Easier servicing and replacement of pump and switch. Loud alarm horn provides audible warning of alarm condition. Receptacle in enclosure serves as the pump disconnect. Pump can be easily tested by plugging directly into receptacle in the enclosure. Alarm system operates even if pump circuit should fail. Professional, neat-looking. Poly pedestal will not crack in cold weather. Two year limited warranty. Junction box keeps controls out of the snow, mud and wet conditions. Competitively priced. Alarms | Panels & Controls | Switches | Accessories | Prices | About | Contact | Distributors & Reps

© 2001 Septronics Inc. All Rights Reserved