TM 1 Specifications Alarm: Available for high or low level alert. Voltage: Primary 120V, 60 Hz with six foot line cord. Secondary 15V 60 Hz. Watts: Alarm Condition: 6.5 watts Enclosure: Rugged R-59 ABS 6" X 4" X 2.5" enclosure with stainless steel mounting plate. Alarm Switch Terminal Connection: 1 amp, 15VAC. Alarm Horn: At ten feet: 87 decibels Alarm Float: Septronics alarm float #4301; pipe clamp Housing: 2-5/8" dia X 4-5/8" long, high impact, noncorrosive ABS with pipe strap. For use in liquids up to 221-degrees Farenheit. Mechanical Switch: micro switch Cable: Water resistant Neoprene (CPE), 15' cable, 16 GA, 2-conductor, SJOW-A (UL), SJOW (CSA) Options Auxiliary dry contacts for remote alarm hookup. Patent #: D416,232 TM1 Pricing Model # Description TM1 Indoor Alarm, w/visible and audible horn, complete with alarm float. TM1-A Indoor Alarm, w/visible and audible horn, complete with alarm float and auxilary contacts. Septronics Indoor Liquid Level Alarm System The Septronics TM1 indoor liquid level alarm has been designed for easy installation, functionability, and superiority. The smooth contoured shape leaves no open crevices for dirt or moisture in get in. The TM1 is ideally suited for lift pump chambers, sump pump basins, holding tanks and a variety of other environments that require liquid level monitoring; and it provides both an audible and a visual signal. The "TM1" responds to the rise and fall of the Septronics Control Switch #4301 (included). As the liquid level changes, the control switch either rises and closes the circuit, or falls and opens the circuit. When the circuit is closed (an alarm sitution) both a visual and audible signal will be emitted. The horn can be turned off, but the red warning light will remain on until the alarm condition is resolved. Standard Features Exclusive patented external mounting system. No disassembly required. No single-point screw or nail attachment. UL accepted R-59 ABS molded enclosure. Stainless steel back plate. Smooth, contoured shape reduces the possibility for dirt or moisture intrusion. No sharp edges. Uses heavy duty snap-in style rocker switches. Alarm light has been engineered to reduce damage if dropped or bumped. Simple, easy and fast to install. Mounting screws, anchors and spade connections included. Advantages Professional, neat-looking. Two year limited warranty. Competitively priced. All components are UL Listed. When the circuit is closed, a red warning light is lit and a high pitched sound is emitted from the control panel. The horn can be turned off, but the red warning light will remain on until the alarm condition is resolved. Alarms | Panels & Controls | Switches | Accessories | Prices | About | Contact | Distributors & Reps

© 2001 Septronics Inc. All Rights Reserved