Septronics - time saving products for onsite septic systems

*

Alarms

*

Panels & Controls

*

Switches

*

Accessories

*

Prices

*

Prices

*

Contact

*

Distributors

6000 Series Alarm Control Specifications


Volts:
120 VAC only

Alarm Light:
6 watts

Alarm Horn:
83-85 db @ 10'

Enclosure:
PVC, 10" x 12" x 6"

NEMA 4X with UV protection

All Components:
UL listed

Watts:
70 max
120 Volt Pump Specifications

Volts:
120 VAC

Max:
1 HP

Single Phase

60 HZ

Max. Run Current:
13 AMPS *

Max. Start Current:
192 Peak AMPS

* Larger AMP circuit breakers available.
230 Volt Pump Specifications

Volts:
230 VAC

Max:
2 HP

Single Phase

60 HZ

Max. Run Current:
16 AMPS *

Max. Start Current:
192 Peak AMPS

6000 Series Pricing

* Larger AMP circuit breakers available.

Made in the USA

6000 Series Alternating Pump Control Panel

Single Phase Duplex Alternating Pump Control Panel

Applications include sump basins, lift stations, effluent chambers, and irrigation applications. Available in 120 or 230 volt units.

Septronics Series 6000 Control Panels are single phase, duplex-alternating pump control panels. The 6000 duplex alternator is designed to alternately control two single-phase pumps in commercial or residential sewage or effluent pump systems. The alternating action allows an equal amount of wear on both pumps. In addition to alternating the pumps, it also provides an override feature that will operate the other pump should one pump fail. The panel also features both an audible and visual alarm system should a high water situation occur.

Standard Features

  • NEMA 4X thermoplastic enclosure for outdoor or indoor use.
  • Heavy-duty magnetic motor contactors.
  • Control printed circuit board provides alarm control and alternation of pumps.
  • Pump run indicator lights.
  • Power on indicator light.
  • Angled easy to reach shock resistant terminal blocks.
  • HOA switches to offer manual operation of pumps.
  • Control On/Off switch.
  • Circuit breakers, standard equipment.
  • Alarm horn, standard equipment.
  • Alarm light, standard equipment (visible for 360 degrees).
  • Horn silence switch, externally mounted; 95db.
  • Alarm test switch.
  • Control/Alarm fuse.
  • Three float switches standard equipment.
  • Schematic diagram.
  • Installation instructions.
  • Two year warranty.
  • UL listed components.
  • Auxiliary alarm contacts.

Options

  • Elapsed time meters.
  • Event counters.
  • Lockable latches.
  • Fourth float.
  • Alarm flasher.
  • Lightning protection.
  • Poly pedestal with adapter plate.
  • Base plate for pedestal.
  • 2 X 3 T.B.E. PVC pipe nipple w/3 locknuts.

*
888-565-8908

*

Alarms | Panels & Controls | Switches | Accessories | Prices | About | Contact | Distributors & Reps


© 2001 Septronics Inc. All Rights Reserved